| PRODUCTS |
FUNCTION |
APPLICATION RATE |
| DIEDRESS-2307 |
Water Base Die coat required for Pressure Die castings of Aluminium Based Alloys. Useful for
Die cooling and easy release of Aluminium Based Castings |
It is to be diluted with Water @ 1:80 to100 Stir well before use.
It is to be applied by Spraying. |
| DIEDRESS - 2256 |
Water Base Die coat required for Pressure Die castings of Aluminium Based Alloys for
Die cooling and easy release of Aluminium Based Castings |
It is to be diluted with Water @ 1:80 to100 Stir well before use.
It is to be applied by Spraying. |
| DIEDRESS-PL |
Graphite free plunger lubricant in high pressure die-casting |
Apply DIEDRESS-PL on plunger tip by brushing or swabbing |
| DIEDRESS-4250A |
Graphite oil based Lubricant for die face and plunger for high pressure die-casting |
Apply DIEDRESS- 4250A on plunger tip, on the hot spot, deep draw areas etc. by brushing or swabbing Application frequency depends upon complexity of die. |
| DIEDRESS-MS |
Titanium dioxide and oil based dressing recommended for M.S.Tools, M.S. Spoons, M.S. Pouring ladles of PDC |
Coated M.S. Tools should either be heated upto 700° C by portable burner or dip in untreated Molten Aluminium for ensuring strongly adhere of coating before continuous use |
